Every bolt on your bike came from the factory in steel — cheap to make, heavy to carry, and the first thing to rust once mud and trail moisture get into the threads. Titanium Grade 5 (6AL-4V) hardware swaps that stock steel for an aerospace-grade alloy that's roughly 40-45% lighter at the same strength, rolls its threads instead of cutting them for better fatigue life, and shrugs off corrosion that eats OEM bolts after a season of wet rides. None of this is a single dramatic upgrade — it's grams shaved in a dozen places that add up, plus hardware that still turns freely two seasons later instead of seizing. Here are four titanium swaps worth doing first.
1. Titanium Motor Bolts — ReRode R1 (Set of 4)
The ReRode R1 titanium motor bolt set is the fastest way to cut weight on the motor mounts without touching anything structural. The set covers all four motor mount positions — two per side — precision-machined from certified Grade 5 6AL-4V titanium and anodized/PVD coated for a finish that holds up to trail grime instead of flaking off in a season. Motor mounts take constant vibration and load transfer every time the motor spins up, which is exactly where rolled threads earn their keep over cheaper cut-thread titanium — better fatigue strength means the bolt doesn't work itself loose the way a budget swap can. At roughly 40% lighter than the OEM steel bolts they replace, it's a clean, direct-fit upgrade for anyone building out a ReRode R1 or R1+.
2. Titanium Fork Bolt Kit — RFloXa Hawk 35 (21-Piece)
The RFloXa Hawk 35 titanium fork bolt kit is the biggest titanium swap on this list by piece count — 21 pieces covering every pinch bolt and plastics screw on the fork, sized for the E-Ride Pro SR and Pro SS 3.0. That's 15 M6 pinch bolts across the axle, lower triple, and upper triple (each with its own torque spec) plus 6 M5 screws for the mud guards and plastics, all in the same certified Grade 5 titanium with the same anodized/PVD finish. Doing a fork bolt kit all at once instead of piecemeal means you only touch triple clamp torque specs one time, and you end up with a consistent finish across the whole front end instead of a patchwork of hardware. Unsprung and semi-sprung weight on the fork matters more than weight almost anywhere else on the bike for how the suspension actually reacts to square-edge hits, which makes this one of the higher-value titanium swaps per dollar.
3. Titanium Fork Axle & End-Bolts — KKE Forks (Surron LBX-Style)
This titanium front axle and axle end-bolt set replaces the stock steel axle on the KKE fork — the OEM Surron LBX-style fork specifically, not a universal fit across every KKE variant, so confirm your fork before ordering. The axle is precision-machined to 165mm length and 19.9mm OD from certified Grade 5 6AL-4V, coming in around 45% lighter than the stock steel axle it replaces while holding the same strength-to-weight advantage titanium carries across this whole category. The front axle is rotating mass at the very end of the fork, so trimming weight here changes how quickly the front end can change direction more than the same grams saved somewhere on the frame. It ships anodized/PVD coated in a handful of color options, and the matching axle end-bolts are available to run alongside it.
4. M8 Titanium Locking Flange Nut — The One to Buy in Bulk
Not every titanium upgrade needs to be a kit. The M8 titanium locking flange nut is a single DIN 6923 Fuji-style serrated flange nut — a direct swap anywhere your bike uses a stock M8x1.25mm nut, with the serrated flange doing the locking job a separate lock washer would otherwise handle. It's the cheapest entry point on this list and the easiest to justify buying a handful of at once: keep a few in your toolbox for whatever stock steel nut strips, corrodes, or just annoys you first. Same Grade 5 certification, same rolled threads, same roughly-45%-lighter-than-steel spec as the rest of this list — just in the single-nut size that fits almost anywhere on the bike.
Putting It Together: Where to Start
If you're easing into titanium hardware, start with the M8 nut wherever your bike uses that size — it's the cheapest way to see if you like the look and the weight savings before committing to a full kit. Move to the motor bolts or the fork bolt kit next, since both replace hardware that actually sees meaningful load and vibration instead of just sitting there. All of our titanium hardware ships Grade 5 certified with the same anodizing and rolled-thread process behind it — browse the full lineup for your platform at throttleco.store.