Warp 9 1-1/8 inch tapped MX handlebars — 7010-T6 billet aluminum with M8 threaded bar ends for wrap-around handguards
Warp 9 1-1/8" tapped MX handlebars for Surron and Talaria e-motos — 7010-T6 billet aluminum
Warp 9 tapped handlebars for Surron and Talaria — M8 threaded ends for wrap-around handguards
Warp 9 MX handlebars for Surron and Talaria e-motos — CR High and KTM SX bend profile
Warp 9 1-1/8" tapped handlebars for Surron Light Bee — billet aluminum bar detail
Warp 9 MX/offroad handlebars for Talaria and Surron — anodized finish close-up
Warp 9 tapped handlebars for Surron and Talaria e-motos — handguard mounting insert detail
Warp 9 1-1/8" MX handlebars for Surron and Talaria — bend and sweep profile view
Warp 9 MX handlebars for Surron and Talaria e-motos — mounted on bike
Warp 9 1-1/8" tapped MX handlebars for Surron and Talaria — silver anodized colorway

Warp 9

Warp 9 MX/Offroad 1-1/8" Tapped Handlebars

$98.00
Handlebar Type/Bend

This part = 98 entries to win the ETM RTR
Ships fast from Idaho Falls
Double-check fitment before you send it — hit the fitment tab below.
Description

Say goodbye to fidgety handguard expansion plugs. These Warp 9 bars have their ends plugged and tapped with an M8x1.25 threaded insert for a secure, reliable mount for all wrap-around handguards — no plugs pulling out or spinning loose in a crash.

Compatible With:

  • Any bike with 1-1/8" bar mounts
  • Sur-Ron Light Bee X
  • Sur-Ron Ultra Bee
  • Talaria Sting MX3/MX4/MX5
  • MX and off-road bikes generally

Features:

  • M8x1.25 tapped bar ends for all aftermarket wrap-around handguards
  • Includes aluminum grip guards and stainless bolts if not running handguards
  • Oversized 1-1/8" (28.6mm) clamping diameter tapering to 7/8" (22.2mm) for standard controls
  • Crafted from 7010-T6 aluminum with computer-extruded variable wall thickness for reduced vibration
  • CR High Bend: width 790, height 101, rise 71, clamp area 142, sweep 73
  • KTM SX Bend: width 808, height 95, rise 70, clamp area 152, sweep 38

Warp 9 is a trusted name in MX and off-road cockpit components, and these bars are built to the same standard riders expect from full-size dirt bikes — now sized and mounted for the e-moto platforms we ride every day.

Note that bar mounts are not included — pair these with your existing 1-1/8" mounts or a set from our cockpit lineup. Ships fast from the USA, straight to your door.

See Also: Warp 9 E-Ride Adjustable Peg Mount | Warp 9

Frequently Asked Questions

Do these bars come with mounting hardware?

The bars include tapped ends for handguards and, if you skip handguards, aluminum grip guards with stainless bolts. Bar mounts (the clamps that hold the bars to the triple clamp) are sold separately.

Which bend should I choose — CR High or KTM SX?

CR High gives a taller, more upright stance (height 101, rise 71); KTM SX sits lower and sweeps less (height 95, rise 70) — pick based on your preferred riding position.

Will my stock handguards still fit?

The M8x1.25 tapped ends are designed for aftermarket wrap-around handguards specifically — check your current handguard's mounting hardware against this spec before assuming compatibility.

Bike fitment

Check fitment before you send it.

Warp 9 MX/Offroad 1-1/8" Tapped Handlebars $98.00