E-Ride Pro 2.0/3.0/SR Titanium Full Bolt Kit – Grade 5

The most complete titanium hardware kit for the E-Ride Pro on the market — covering virtually every visible bolt on the bike. Available for the 2.0, 3.0, and SR models.

• Most complete kits on the market since 2024
• 45% lighter than OEM steel — real weight savings across the entire bike
• Grade 5 6AL-4V certified — aerospace-grade titanium, greater strength-to-weight ratio than steel
• Rolled threads — enhanced fatigue resistance for long-term reliability
• 100% corrosion-proof — anodized & PVD coated in 8 colors
• Ships same day from Chicago — most orders depending on time of order
• Exclusively sold at Titanium Surron and authorized retailers only
• Use torque wrenches where applicable. More torque info found here.

2.0 Kits include:

• Peg pins
• Kickstand bolt/nut
• Rear axle nut
• Jackshaft nut (M10 older 2.0s, or M12 newer 2.0s)
• Motor mount bolts
• Peg bracket bolts
• Subframe bolts (custom head)
• Skid plate/bash guard bolts
• Sprocket bolts
• Chain/mud guard bolts
• Ignition cover bolts
• Brake caliper bolts (20mm x4)
• Front rotor bolts
• Rear rotor bolts
• Headlight bracket hardware
• Upper frame bolts near battery lid pins
• Controller bolts
• Handlebar to OEM neck (stem) bolts
• Handlebar brake handles and throttle

3.0 Kits include:

• Motor mount bolts (4 pcs)
• Peg bracket bolts (4 pcs)
• Skid plate/bash guard bolts (4 pcs M8 + 4 pcs M6)
• Subframe bolts (custom head) (4 pcs)
• Sprocket bolts (custom head) (5 pcs)
• Brake calipers (4 pcs)
• Along frame, below battery lid bolts (2 pcs)
• Bottom of battery tray (2 pcs)
• Chain/mud guard bolts (6 pcs)
• Headlight bracket hardware (2 pcs)
• Rear rotor bolts (6 pcs)
• Controller bolts (4 pcs)
• Ignition cover plate (2 pcs)
• Motor cover (2 pcs)
• Battery lid plastic side covers (2 pcs)
• Stem bolts (10 pcs)
• Brake handles (2 pcs 18mm — 2024 models) (4 pcs 15mm — 2025 models)
• Throttle (2 pcs)
• Front rotor (6 pcs)
• Rear axle nut (1)
• Battery lid bolts (2 pcs)
• Kickstand bolt/nut (1)
• Jackshaft nut (M12, 1)

SR Kits include:

• Motor mount bolts (4 pcs)
• Peg bracket bolts (4 pcs)
• Skid plate/bash guard bolts (4 pcs M8 + 4 pcs M6)
• Subframe bolts (custom head) (4 pcs)
• Sprocket bolts (custom head) (5 pcs)
• Brake calipers (4 pcs)
• Along frame, below battery lid bolts (2 pcs)
• Bottom of battery tray (2 pcs)
• Chain/mud guard bolts (6 pcs)
• Headlight bracket hardware (2 pcs)
• Rear rotor bolts (6 pcs)
• Controller bolts (4 pcs)
• Ignition cover plate (2 pcs)
• Motor cover (2 pcs)
• Battery lid plastic side covers (2 pcs)
• Stem bolts (10 pcs)
• Brake handles (2 pcs 18mm — 2024 models) (4 pcs 15mm — 2025 models)
• Regen throttle (1)
• Throttle (2 pcs)
• Front rotor (6 pcs)
• Rear axle nut (1)
• Battery lid bolts (2 pcs)
• Kickstand bolt/nut (1)
• Jackshaft nut (M12, 1)

Not included:

• Suspension linkage bolts (sold separately)
• Fork bolts (sold separately)

Kits are designed around OEM E-Ride Pro. Some aftermarket parts (seat riser, direct mount stem, peg drops, aftermarket brakes, etc.) may require additional hardware purchased separately.

E-Ride Pro complete kits

This E-Ride Pro body kit is also available bundled with a titanium fork bolt kit, matched to the fork on your bike: EXT Ferro, FastAce Gravitee, Fox 40 / Bomber 58, Tech E39, RFloXa Hawk 31 or Sirris F43. Linkage bolts are sold as the E-Ride Pro titanium linkage kit. See other bikes in titanium full-body bolt kits for e-moto.