Vendor: Warp 9

M8X12-FA DR650 Rotor Bolt

Regular price $0.75
Throttle Bros score Not rated
Rider score None yet

How we score · both scores use the same 1 to 10 anchors

This part = 0 entries in the Season 1 Giveaway

Ships fast from Idaho Falls
Double-check fitment before you send it. The fitment guide below has rider reports for your bike.
Description

Suzuki's DR650 uses a heavier-duty M8 rotor bolt than most dirt bikes — this Warp 9 M8x12 flanged (FA) bolt is spec'd exactly for that fitment so your rear disc stays securely clamped.

Compatible With:

  • Suzuki DR650 (all years using the M8x12 flanged rotor-bolt pattern)

Features:

  • M8 x 12mm flanged (FA) head — no separate washer required
  • Hardened steel built for a heavier dual-sport's braking loads
  • Correct thread pitch and length for DR650 rotor mounting
  • Integral flange spreads clamp load evenly across the carrier
  • Install with medium-strength thread locker, torqued to Suzuki spec

The DR650 is a heavier bike than a typical dirt bike, and Suzuki speced the larger M8 bolt accordingly to handle the extra braking torque. Reusing worn M8 hardware — or worse, substituting a lighter M6 bolt — is a common mistake that leads to a rotor that isn't properly secured.

Install tip: Clean old thread locker from the carrier threads, tighten in a star pattern, and recheck torque after the first ride since new hardware tends to seat slightly as it beds in. A DR650 loaded for touring puts more sustained heat through the rear brake than most riders expect, which is exactly the scenario where undersized hardware shows its weakness first.

Ships fast from the USA, straight to your door.

Frequently Asked Questions

Which bike uses the M8x12 rotor bolt?

It is sized for the Suzuki DR650 brake-rotor fitment using the M8x12 flanged pattern. Check your rotor carrier before ordering.

Why replace rotor bolts?

Rotor bolts endure constant heat and vibration. Fresh, correctly-specced hardware keeps your disc clamped securely and rattle-free.

How long does shipping take?

In stock and ships fast from the USA.

Related: Finishing out a DR650 build? Pair this with the Handlebar Risers - Suzuki DR650 and the Rear Disc Guard - Suzuki DR650.

M8X12-FA DR650 Rotor Bolt $0.75

Fitment guide

Does it fit your bike?

No fitment data yet. Got this part on your bike? Tell us if it fit.

No Throttle Bros rating yet

Every product we test gets a real score and a video. Want this one next?

Rider Score

What riders say

$10 off your next order for any honest rating

Be the first to rate this. Same questions the crew answers, about a minute, no account needed. Any honest rating earns $10 off your next order.