M6X13-FH KTM Rotor Bolt

Rotor bolts are the cheapest part of your brake system and the one most likely to ruin a ride if you get them wrong. These are Warp 9 M6 x 13mm flat-head rotor bolts, cut to the correct length and head profile for KTM, Husqvarna, and GasGas brake discs. The flat head sits flush in the rotor countersink so nothing protrudes into the caliper sweep.

Length matters more than people expect. Too long and the bolt bottoms in the hub before it clamps the rotor; too short and you lose thread engagement and the bolt walks loose under heat cycling. At 13mm these are the factory spec for the standard KTM-family rotor mount, and they are hardened so the hex socket does not round out when you torque them properly or break them free later.

Compatible With:

• KTM front and rear brake rotors (standard M6 pattern)
• Husqvarna FC, FE, TC, and TE models
• GasGas EC, EX, MC models
• Warp 9 wheels built to the KTM-family rotor pattern

Features:

• M6 x 13mm, flat-head countersunk profile
• Hardened steel — resists rounding under torque
• Correct length for full thread engagement without bottoming out
• Sits flush in the rotor face, clear of caliper and pad sweep
• Always use fresh thread locker and torque to your bike’s spec
• Sold to replace factory hardware one-for-one

Ships fast from the USA, straight to your door.

See Also: M6X1.00-FN Rotor Nut | KTM 790/890 260mm Rear Floating Rotor | Brake Rotors | KTM 1090-1290 265MM Rear Floating Rotor

From the Blog: How to Install a Warp 9 Wheel on Your Surron Ultra Bee or Talaria (Step-by-Step)