News

Best Suspension Upgrades for Your Surron or Talaria in 2026

Hey, Bryce here. The suspension is the first thing every rider notices when they jump off a stock Surron or Talaria onto a properly set-up one — and it's usually the last thing people upgrade. Brakes and graphics get the attention, but the shock and forks are what decide whether a rutted trail feels controlled or like you're getting bucked off every third hit. If you're chasing more confidence at speed, less bottoming on jump landings, or just a bike that tracks straight through braking bumps, suspension is where that money goes first.

This guide walks through the shocks, forks, and linkage upgrades we actually run and recommend at Throttle Bros, plus the small titanium hardware that keeps a suspension upgrade from loosening up on you mid-season.

Why stock suspension runs out of travel fast

The factory shock and forks on a Light Bee X, Ultra Bee, Talaria Sting, or E-Ride Pro are tuned for a wide range of rider weights and a wide range of terrain, which means they're not really tuned for anything specific. Spring rates are soft, damping is minimal, and there's little to no adjustability — so the bike either wallows through chop or slams through its stroke on anything bigger than a curb hop. A rider under 150 lbs and a rider over 200 lbs are fighting the same spring, and neither one is getting the full travel the bike was built with.

Rear shocks: where to start

The rear shock is almost always the first swap, because it's the single part that most changes how the bike tracks on acceleration bumps and braking chatter. The EXT Arma MX Rear Shock brings true MX-spec compression and rebound adjustability to platforms that never had it from the factory, and EXT also builds the REA MX Shock for the Surron Ultra Bee specifically, matched to the Ultra's linkage ratio instead of a generic universal length. If you want adjustability without the EXT price point, the Tuttio & Yozma Upgraded DNM Rear Shock Kit is the budget-conscious pick riders ask us about most, and the Warp 9 FastAce Suspension Bundle pairs a rear shock with matching fork internals so you're not mixing spring rates front to rear.

Forks: fixing the front end

A stiffer rear shock without a matching front end just moves the problem forward — riders who only upgrade the rear often end up with a bike that dives under braking because the forks are still soft. The Pure Racing Surron Ultra / Talaria Komodo Forks use titanium lowers to cut rotating mass while adding real compression damping, which is the combination that actually improves front-end feel instead of just adding stiffness. For riders who want to dial in their own settings as they get faster, the Tuttio & Yozma Upgraded Adjustable Forks give you external clickers so you're not sending the forks out every time the terrain changes.

Linkage: the part nobody thinks about

Linkage geometry changes the leverage ratio the shock works against through the stroke, and a worn or flexy stock linkage can undo even a great shock upgrade. The Heavy Hitter Talaria Billet Race Suspension Linkage is CNC-cut for a tighter tolerance than the stamped factory piece, which translates to a more progressive feel deeper in the stroke — exactly where bottoming resistance matters most on a hard landing.

Don't skip the hardware

A new shock is only as solid as what's bolting it to the frame. Swingarm pivots and shock mount bolts take a beating on an e-moto because there's no engine vibration masking the flex, so loose or corroded stock bolts show up fast as play in the rear end. We stock titanium shock mount hardware for the E-Ride Pro, Altis Sigma, and Talaria XXX, along with Talaria Sting swingarm bolts and Surron/Segway swingarm frame bushings to take up the play a season of trail riding puts into the stock bushings. None of it is glamorous, but a shock upgrade paired with fresh hardware is the difference between a tight rear end all season and one that's clunking by August.

Putting it together

If you're building a suspension upgrade in stages, go rear shock first, forks second, and linkage third — in that order you're always improving the weakest link rather than making one end of the bike outclass the other. Match your platform exactly before you order; Surron, Talaria, and E-Ride Pro linkage ratios aren't interchangeable, and a shock valved for the wrong leverage ratio will never feel right no matter how good the internals are.

Browse the full Surron and Talaria suspension lineup at ThrottleCo — the same parts Bryce and the Throttle Bros crew run on their own bikes, ships fast from the USA.

Back to News